Mindman Grippers

Without lubrication

Standard grease: 100~500 mm/sec 
Slow motion grease: 50~100 mm/sec

10: 53.9 N, 15: 137 N , 20: 231 N, 
25: 363 N, 32: 588 N, 40: 922 N

¿¿¿ Betwer the speed range limit the actuator stroke must 
not exceed to 2m/minute.

???10~???60??? (No freezing)

20: 60 (c.p.m), 25~50: 30 (c.p.m)

Not required

±0.2

0.030~0.827 N.m

Opened side:180°, Closed side:-4°~ -6°

Not required

±0.2

0.016~0.228 N.m

Opened side:180°, Closed side:-3°

RT:Reed switch, RTN:NPN, RTP:PNP

80g, 150g, 320g, 600g

M5×0.8, Rc1/8

90°±10°

Left (L)???Right (R)

???5???~???60??? (No freezing)

50~200 mm/s

±2°,±1.3°, ±1.2°, ±1°

Not required

RDE, RCE, RCE1, RNE, RPE, RDEP

Double acting with spring (φ32-20),
Shockless stopper (φ50-30,φ63-30,φ80-40)

φ32-20,φ50-30,φ63-30,φ80-40

Not required

Standard with magnet

RCA for φ50 , RCB, RCE, RCE1, RDEP

Compressed Air

0.05~1 MPa

1.5 MPa

Not required

With adjustable cushion at both ends

???5~???60??? (No freezing)

Cylinder:Not required, Lever:Grease (Actuation at)

30, 40, 60, 70, 85

Closed side:8~100 N, Opened side:5~8 5N (???)

6, 8, 12, 14, 16

RDE ,RDE-D

66g, 144g, 255g, 419g, 719g

??? Gripping point length L=30mm, Pressure=0.5 MPa.

180 cycles/min

Not required

± 0.01

RDE, RDE-D

Double acting: 55, 125, 250, 460 g
Single acting : 70, 145, 270, 490 g

20, 25, 40

16, 26, 41

Not required

50, 66, 80, 100, 125, 160, 200, 300

0.025~0.8 s

Not required

9.2~2270 cm3

Mounting block, Centering sleeve

RDF, RDFV

RDP8 (2 wire), RNP8 (3 wire)

2.2 ~ 78 kg

MCRPL:16,25,32,40 / MCRPLF:16,25,32,40,50,63

MCRPL:M5~G1/4 / MCRPLF:M5~G3/8

???10??? ~ +80??? (No freezing)

With or Without lubrication

With adjustable cushion at both ends

φ16: 100~3300 mm / φ25~63: 100~5600 mm

???1. Minimum stroke unit 1mm. 
???2. The tube isn't airtight, so the cylinder is allowed little leakage.
Before the cylinder is sale, it has passed the standard of leakage test.

φ10, φ15, φ20, φ25, φ32

???5??? ~ ???60???

Without lubrication

Standard grease: 100~500 mm/sec, Slow motion grease: 60~100 mm/sec (???)

φ10: 53.9N, φ15: 137N, φ20: 231N, φ25: 363N, φ20: 588N

??? Betwer the speed range limit the actuator stroke 
must not exceed to 2m/minute.

φ10, 15, 20, 25, 32

φ10, 15: M5×0.8, φ20, 25, 32: Rc1/8

Without lubrication

Standard grease: 150~400 mm/sec, 
Slow motion grease: 80~150 mm/sec (???)

φ10: 53.9N, φ15: 137N
φ20: 231N, φ25: 363N, φ32: 588N

φ10, 15 : MDSC-0806-3-N, φ20 : MAC-1007-SN
φ25 : MAC-1412-SN, φ32 : MAC-2015-SN

???1.Input air-port needs at speed control valves to control speed.
???2.Betwer the speed range limit the actuator stroke 
must not exceed to 2m/minute.

Not required

50~500 mm/sec

RDKP, RCA

PMB-040 (RDKP), BGA50, BGA63 (RCA)

Double acting

32

Rc1/8

Cylinder:Not required, Lever:Grease